Program Settings: Difference between revisions

From ACVacars Manual
mNo edit summary
Line 69: Line 69:
* '''Show if new files''', if checked, whenever ACVacars detects new files inside its Download-Center while start-up of ACVacars, the Download-Center is being automatically started up at the end of ACVacars start-up process.
* '''Show if new files''', if checked, whenever ACVacars detects new files inside its Download-Center while start-up of ACVacars, the Download-Center is being automatically started up at the end of ACVacars start-up process.
* '''Download new files automatically''', if checked, any new files of the Download-Center will be automatically downloaded ('''Be aware!''' At the beginning it will download several hundrets of flight-plans what can take 15 minutes or longer). To activate this setting, you must activate the setting "Show if new files" first.
* '''Download new files automatically''', if checked, any new files of the Download-Center will be automatically downloaded ('''Be aware!''' At the beginning it will download several hundrets of flight-plans what can take 15 minutes or longer). To activate this setting, you must activate the setting "Show if new files" first.
*
*'''Install downloaded files automatically''', if checked, any downloaded '''installer'''-file will be automatically installed after its download.
*'''Auto-Copy new Flightplan to FSim''', if checked, any downloaded flightplan files are being copied to the flight-plan folder of the selected flight simulation automatically.

Revision as of 07:43, 8 March 2024

ACVacars program settings

ACVacars Manual Main Menu ProfilesSettings 1019
click menu entry "Profiles / Settings" to enter program settings

Profiles / Settings

  • To create or to modify a profile, click the menu entry "Main->Profiles / Settings".
  • The same for reaching the section "Settings" of ACVacars.

Section Profile

ACVacars Manual Main ProfilesSettings ProfilePart 1019
section "Profile" to create/modify a profile

Required steps to create a profile

  • Enter your profile-name into the top-left textbox.
  • Click button [Create local Profile] to create the profile with the given name.

How to delete an existing profile

  • To delete a profile, select the specific profile on the context menu.
  • After the selection, press the button [Delete local Profile] to delete it.
  • The default profile "Profile_Default" cannot be deleted. If you delete it, a new "Profile_Default" will be created with default settings.

Section Tabs

ACVacars Manual Main ProfilesSettings Tabs 1019
Program settings differentiated in tab-sections

The following sub-sections exist:

  • Pilot, for creating/modifying account-profiles to connect with the VA website.
  • General, to set/change the most common settings of ACVacars.
  • PIREP, to set/change the content-settings of the log-text, created during an ACV flight.
  • Weather, to set/change the weather source.
  • FSim Paths, to set/change the folder paths to the connected flight simulations.
ACVacars Manual Main ProfilesSettings TabProfile 1019
tab "Pilot" showing the profile-connection details

Tab "Pilot"

  • Textbox "URL" contains the not changeable URL to the VA website.
  • Use textbox "Pilot-ID" to enter your profile number.
  • Enter your password of your VA website account into the textbox "Password". The password is individual, each ACV member shall choose his/her own password.
  • Enter the "VA-Code" into the textbox with similar naming. The VA-Code is pre-given by the virtual airline and cannot be changed by the user.
  • Choose the matching flight simulation which shall be connected with ACVacars by selecting it in the ComboBox "Flight-Sim". Change this selection each time you use ACVacars with another flight simulation. Click button "Logout" before changing the selected flight simulation. After changing it, click button "Login" to connect your local profile with your VA website profile.
  • Below the last ComboBox, the batch of your connected VA account is being shown. Use this indication as further proof to be selected with the specific online VA account.
ACVacars Manual Main ProfilesSettings General 1019
tab "General" shows the most important settings

Tab "General"

Most settings are self-explaining. In details:

  • Keep main program window always on top, this setting is actually deactivated.
  • Check for program updates automatically, if checked, ACVacars checks for own program updates during start-up.
  • Connect with FSUIPC, if checked, ACVacars repeatedly tries to connect with an installed FSUIPC or XPUIPC interface.
  • Connect with VA website, if checked, ACVacars repeatedly tries to connect with the VA website.
  • [---]
  • "During program-startup, automatically reset FSim shader folder", if checked, ACVacars tries to delete all temporary shader folders of P3D, MSFS or XP, depending on the currently chosen FSim. But, ACVacars does only perform this task if the considered flight simulation is not running. Advantage: A deleted temporary share-folder forces the flight simulation to re-create all shaders again, this can help to fix performance or graphical problems. Disadvantage: The re-creation of the shaders temporarily costs performance during start-up of the flight simulation, until all shaders are re-created again. It is not recommended to have this setting permanently activated.
  • Button [Reset shader folders], clicking this button deletes all temporary-shader folders of the pre-chosen flight simulation. It is only executed when the flight simulation is not running. The advantage and disadvantage of deleting any temporary shader folders are described above.
  • Button [Reset P3D default config files], clicking this button does delete two default config files of P3D (but not in MSFS or XP). To force P3D indirectly to re-create these default config files during P3D's next start-up. Advantage: Can solve start-up problems with P3D; Disadvantage: It may cause further problems with P3D. Click this button only if you know what you are doing.
  • [---]
  • Send content of ErrorLog file automatically, if checked, any logged program errors in the ErrorLog file are being sent to the ACVacars developer when ending ACVacars.
  • Button [View ErrorLog file], clicking this button shows any content of ErrorLog file to the user. Feel free to use this feature to check, what content is being protocolled in case of a program error.
  • Button [Send ErrorLog content], clicking this button to manually send the ErrorLog file content to the ACVacars developer.
  • [---]
  • Pause/Save FSim automatically if closer to arrival airport (nm), if checked, the running flight simulation is being paused as soon as the aircraft enters the chosen range to the arrival airport.
  • If FSim creates savegame, automatically save Flight-Log, if checked, ACVacars does save the data/parameter/status of the running ACV flight as soon as the running flight simulation creates a savegame.
  • Value needed within savegame-name, write a key value into this textbox, to create only an ACVacars-savegame if the FSim-savegame filename contains this entered key value.
  • Auto creation of savegame flight, interval in minutes, if checked, ACVacars triggers automatically and repeatedly the creation of a FSim-savegame and of a synchroneous ACVacars savegame after each passing of the selected amount of minutes.
  • Auto creation of savegame pre-defined flight situations, if checked, ACVacars triggers above mentioned creation of savegames after passing pre-defined flight-situations like "beginning taxiing, after take-off, after passing FL100, reaching cruise level, etc.".
  • Show messages during flight in FSim, if checked, important ACVacars messages are shown to the user with the P3D message system. This feature does not work with MSFS and only unreliable with X-Plane.

Tab "General" / Download-Center

These settings are partially overruled by the VA website settings. If so, any overruled setting is grayed out and cannot be set.

  • Check new files during startup, this setting is checked by default and cannot be changed, whenever ACVacars detects new files inside its Download-Center while start-up of ACVacars, it triggers a follow-up process (either showing a message-box or starting-up the download center).
  • Show if new files, if checked, whenever ACVacars detects new files inside its Download-Center while start-up of ACVacars, the Download-Center is being automatically started up at the end of ACVacars start-up process.
  • Download new files automatically, if checked, any new files of the Download-Center will be automatically downloaded (Be aware! At the beginning it will download several hundrets of flight-plans what can take 15 minutes or longer). To activate this setting, you must activate the setting "Show if new files" first.
  • Install downloaded files automatically, if checked, any downloaded installer-file will be automatically installed after its download.
  • Auto-Copy new Flightplan to FSim, if checked, any downloaded flightplan files are being copied to the flight-plan folder of the selected flight simulation automatically.